EMCO 3106 PDF
Rent or buy the by ETS-Lindgren (EMCO) in the test equipment industry at MODEL DOUBLE-RIDGED WAVEGUIDE HORN . EMC Test Systems, L.P. , hereinafter referred to as the Seller, warrants that standard EMCO products. Buy Emco MHz to 2 GHz Double Ridged Waveguide Horn Antenna and other Antennas from Test Equipment Center.
|Published (Last):||7 July 2014|
|PDF File Size:||18.49 Mb|
|ePub File Size:||2.8 Mb|
|Price:||Free* [*Free Regsitration Required]|
These antennas are specifically designed for EMI measurements, but emcco also be used for EW, antenna gain and pattern measurement, surveillance, and other applications. The antenna is also useful for receiving low-level signals where high gain characteristics are needed.
Power Handling Model can handle W peak and W continuously. To maximize performance, Type N connectors are used on Models andand Emcco K connectors are used on Model A Type K female connector is used for increased performance at high frequencies.
When additional power input levels are required, the coaxial feeds are easily removed from eemco waveguides. The 3 dB beamwidth in both polarization planes is very nearly equal at approximately 30 degrees. The mounting brackets for Models and are adjust- able for changing polarization of the antenna.
All models in the series are linearly polarized, have medium gain, optimum half power beamwidth equal in both horizontal and vertical planesand low VSWR.
Quality Construction Double-ridged waveguide antennas are constructed of light- weight corrosion-resistant aluminum and fiberglass, providing years of trouble-free indoor and outdoor service. Emfo Handling up to 1.
Complete with Feed, Waveguide, and Mount Unlike most antennas of this type, EMCO supplies a complete unit with detachable coax-to-waveguide feed and mounting brackets for both horizontal and vertical polarization. Model can handle W peak and W continuously.
This antenna is small and portable with a length of Precision manufacturing contributes to the predictable performance of these antennas. Increased Power Dissipation While the coaxial feed allows power input of up to W Model02, 03higher power input is possible by removing the detachable feed and direct mounting the flange to an amplifier waveguide port.
It is especially effective for generating high electromagnetic fields with relatively low power input. As a set, these linearly polarized broadband antennas have an average VSWR of less than 1. While the coaxial feed allows power input of up to W Model02, 03higher power input is possible by removing the detachable feed and direct mounting the flange to an amplifier waveguide port.
Complain wrong Brand wrong Model non readable.
Standard gain & octave horn – Atec EMCO-3106-3115-3116 User Manual
Unlike most antennas of this type, EMCO supplies a complete unit with detachable coax-to-waveguide feed and mounting brackets for both horizontal and vertical polarization. The Model is an extremely small antenna, offering portability and increased efficiency.
Precision Type N female connectors are used for antennas operating below 18 GHz. Type K female connectors are used above 18 GHz. Optimal Beamwidth The 3 dB beamwidth in both polarization planes is very nearly equal at approximately 30 degrees. Antenna factors are constant throughout the entire operating frequency range.
Atec EMCO-3106-3115-3116 User Manual – Download
All models have uniform gain throughout their frequency span, providing efficient performance characteristics and directionality.
Complete with Feed, Waveguide, and Mount. Complain wrong Brand wrong Model non readable. Models and 10 are electroformed using copper deposition at the rate of 0.
Although large in size, Models through 06 are welded using precise tooling and aluminum sheet metal. The Model has a length of only A Type N female connector is used for increased power handling.
Octave horns are essentially the same as our standard gain horns, except that they are equipped with waveguide-to-coaxial feeds which are matched in frequency to common octave bandwidth amplifier ranges. A mounting bracket is included with all models and allows either vertical e,co horizontal polarization measure- ments. The waveguide features industry-standard flange mounts. The feed system uses a Precision Type N female connector so the antenna can 3160 considerable power with low losses above 12 GHz.
Diagonal dual polarized horn | Atec EMCO User Manual | Page 7 / 14
Double-ridged waveguide emcp are constructed of light- weight corrosion-resistant aluminum and fiberglass, providing years of trouble-free indoor and outdoor service. Models and 08 are investment cast using an alumi- num alloy. Constant Antenna Factor Over Frequency.
Industry standard flanges mount directly to amplifiers equipped with waveguide ports.